Electric Overhauls

Electric Handpiece overhauls consists of replacement of
 bearings, seals, and O-rings. Cleaning of waterlines; lubrication and cleaning/polishing of entire handpiece. We will only replace parts that are needed to ensure optimum handpiece operation. This will allow your handpiece to run like new, with a far less expensive repair.

After every repair, all handpieces will be tested to ensure optimum performance. We will ensure that every handpiece will either meet, or exceed factory recommendations in Torque, RPM, Bur Retention, and Decibel Level.

From $100

KaVo Electric

KaVo Electric Handpieces have three different levels of overhauls.

Level 1: Head/Canister Overhaul: The most common failure among electric handpiece is in the head bearings. This level of overhaul will replace head bearings, o-rings, washers, and other necessary parts needed to ensure optimum operation.
$300

Level 2: Bearing replacement throughout handpiece: All bearings throughout
handpiece will be replaced. The second most common failure is when the
intermediate drive shaft bearings fail, when this happens, it is time to replace all of the bearings.
$400

Level 3: Complete Internal Overhaul: After extended use of handpieces, gears, and other parts begin to dull, rust, and crack. This results in handpieces becoming dangerous to operate, and the handpiece is due for an entire internal overhaul. With this all bearings, gears, o-rings, springs, and washers will be replaced; along with any other part needed to ensure optimum handpiece performance.
$575

Geared spindle replacement: When the chuck system begins to fail, the handpiece will no longer hold a bur, and the geared spindle/head cartridge needs replaced.
$400

Handpiece Leaking from Neck:
$100

Handpiece Internal Leak
$125

Clean, Lube, and Adjustment: Sometimes the handpiece becomes out of adjustment and must be readjusted to meet factory recommendations. In this, all bearings will be cleaned and lubed, and internal and external components of the handpiece will be replaced.
$100

Replaced Fiber Optic Rod:
$115

6-Month Warranty on all repairs

From $100

NSK Electric

NSK Electric Handpieces have three different levels of overhauls.

Level 1: Head/Canister Overhaul: The most common failure among electric handpiece is in the head bearings. This level of overhaul will replace head bearings, o-rings, washers, and other necessary parts needed to ensure optimum operation.
$280

Level 2: Bearing replacement throughout handpiece: All bearings throughout
handpiece will be replaced. The second most common failure is when the
intermediate drive shaft bearings fail, when this happens, it is time to replace all of the bearings.
$400

Level 3: Complete Internal Overhaul: After extended use of handpieces, gears, and other parts begin to dull, rust, and crack. This results in handpieces becoming dangerous to operate, and the handpiece is due for an entire internal overhaul. With this all bearings, gears, o-rings, springs, and washers will be replaced; along with any other part needed to ensure optimum handpiece performance.
$550

Geared spindle replacement: When the chuck system begins to fail, the handpiece will no longer hold a bur, and the geared spindle/head cartridge needs replaced.
$400

Handpiece Leaking from Neck:
$100

Handpiece Internal Leak:
$125

Clean, Lube, and Adjustment: Sometimes the handpiece becomes out of adjustment and must be readjusted to meet factory recommendations. In this, all bearings will be cleaned and lubed, and internal and external components of the handpiece will be replaced.
$100

6-Month Warranty on all repairs

From $100

W&H Electric

W&H Electric Handpieces have three different levels of overhauls.

Level 1: Head/Canister Overhaul: The most common failure among electric handpiece is in the head bearings. This level of overhaul will replace head bearings, o-rings, washers, and other necessary parts needed to ensure optimum operation.
$250

Level 2: Bearing replacement throughout handpiece: All bearings throughout
handpiece will be replaced. The second most common failure is when the
intermediate drive shaft bearings fail, when this happens, it is time to replace all of the bearings.
$400

Level 3: Complete Internal Overhaul: After extended use of handpieces, gears, and other parts begin to dull, rust, and crack. This results in handpieces becoming dangerous to operate, and the handpiece is due for an entire internal overhaul. With this all bearings, gears, o-rings, springs, and washers will be replaced; along with any other part needed to ensure optimum handpiece performance.
$500

Geared spindle replacement: When the chuck system begins to fail, the handpiece will no longer hold a bur, and the geared spindle/head cartridge needs replaced.
$400

Handpiece Leaking from Neck:
$100

Handpiece Internal Leak
$125

Clean, Lube, and Adjustment: Sometimes the handpiece becomes out of adjustment and must be readjusted to meet factory recommendations. In this, all bearings will be cleaned and lubed, and internal and external components of the handpiece will be replaced.
$100

Replaced Fiber Optic Rod:
$115

6-Month Warranty on all repairs

CALL ME
+
Call me!